New technical solutions
Simple control, low consumption – The press is controlled by only one switch. Programmable control system developed exclusively for this press ensures all necessary automatic functions and enables unattended operation.
The press stops automatically when the material is replaced from the hopper. The machine is driven by a hydraulic unit with 2.4 kW electric motor.
Unique design of the press bottom – Stepped design of the bottom of the press hopper ensures optimal supply of material to the shaft of the pressing chamber feeder from two sides and perfect emptying of the chamber.
Square hopper of the volume of 0.6 m3 has one mechanically driven extracting cutter with five arms. The falling material has enough time and space to get into the trough with the help of the extracting cutter with a defined feed.
Pressing against fixed barrier – The pressing chamber has a cylindrical shape, and is closed by a solid barrier from one side. Each briquette is pressed by maximum possible force of the press. The output of the press depends on specific weight of the material. Briquettes fall from the pressing chamber in the prepared bag.
Working environment – A-TYPE 25 cannot be connected to an exhaust system, and cannot be installed outdoors. In case that the hopper would be connected to a pressure system, the material could be unpleasantly blown from the pressing chamber, which is opened during one step of the working cycle. With open hopper this danger is minimized.
Materials for pressing without binders – The pressed material should meet the following conditions: moisture 8 to 15 %, dimensions smaller than 15 mm, and bulk density at least 70 kg/m3
Briquette properties – The briquettes have a shape of a cylinder of diameter 62 mm, length 20 to 30 mm, heating value of 15 to 18 MJ/kg. They can be combusted in all types of stoves, boilers and incinerators for combustion of solid fuels. Their high heating value is better used in gasifying boilers. The volume of waste is decreased eight times by briquetting, and so waste transport and storage are cheaper. Big benefit of the briquetting presses is utilization of wastes and reduction of dust in plants.
- Press hopper volume 0.6 m3
- Favourable price
- Low power consumption
- High-quality workmanship based on standardized components
- Simple installation
- Small dimensions
- Easy operation
|Model||Diameter of briquette||Capacity kg/h||Power input||Weight of machine|
|A-TYPE 25||62 mm||up to 30||2,4 kW||385 kg|
Technical and operating conditions
|Specific weight of the pressed briquette||700 – 1100 kg/m3|
|Maximum operating pressure||180 bar (18 MPa)|
|Maximum operating temperature||60 °C|
|Machine working environment||+5 – +35 °C|
|Permissible moisture of input material||8-15 hm%|
General technical parameters
|Supply voltage||400 V|
|Control voltage||24 V|
|Electrical element protection||IP54|
|Machine noise level||75 dB|
|Operating time of the press||1 shift – limited by oil temperature|
Dimensions of the machine
|Hopper capacity||Length||Width||Height||Hopper||Noise Level|
|0,6 m3||1395||1060||1140||1000||75 dB|
Warranty 12 month.
Spare parts offered.
Despatch and Delivery 2-6 weeks.